How to Install A Subwoofer to A Factory Stereo- Speaker Area

Deal Score0

Introduction:

Do you desperately want to develop the sound quality of your audio system? A better way you can adopt is to join a subwoofer to the factory stereo effectively. That’s why you must know about how to install a subwoofer to a factory stereo. In this article, let’s have a detailed discussion about it.

Step by Step Methods of Installing A Subwoofer to The Factory Stereo System:

How to Install A Subwoofer to A Factory Stereo

Car Subwoofer

You may be wondering about the fact how tough it is to install a car subwoofer to a factory stereo. Like you, once I was thinking similarly. But you know what, once you have mastered the procedure, you can easily do it by yourself.

1. Disjoin the Negative Terminal of The Car Battery:

This is the most important work you need to do at first. If you overlook this matter, nothing will work properly. After all, this is a matter of safety for you. If it blows up in anyway or suddenly causes shock to you, it definitely worsens the matter.

2. Function The Power From The Battery:

So now, you have a factory stereo. First of all, you need to use the wires correctly and run the power effectively. Hence, you are going to lead the wire exactly to the ground side. As you want to get quality music into the amp, you need to drive the blue wire to make the amp on or amp.

3. Attach The Power Wire With The Battery:

Now, you have to make a connection between the power wire and the battery as well. Then add a fuse holder too.

4. Run The Wire Properly:

You must run the power and its crucial point in doing this task. If you want to have it from the fuse box, engine noise can come through the speakers. Try to lead the maximum power through the firewall and that will be better for you. Afterward, you must tape the area where the fuse is going to be wired.

5. Wire The Stereo System:

In this stage, you should make the stereo system out. On the back of the space, you will find 2 RCA cables. Plug it with the stereo and run the connection properly.

6. Wire The Amp:

Once you have placed all the wires rightfully, connect the battery power with the amp. Join the positive and negative terminal with the amp carefully. Make a connection with the speaker box also. The positive terminal of the amp is to get connected with the positive terminal of the speaker and you have to do it precisely.

7. Join the Speaker Wire to the Subwoofer and add the Power of the Battery:

Now, take a speaker wire and carefully add it with the subwoofer. You have already grabbed the signal from the factory stereo.Finally, reconnect the power cable that you disconnected before.

Conclusion: In this instruction, I have illustrated step by step guideline for you to follow. Hopefully, it will help you a lot in installing a subwoofer to a factory stereo.

 

 

 

We will be happy to hear your thoughts

Leave a reply